- SOLARWATT Manager
- Commissioning
- Connect devices
Connect devices
Overview of supported devices
Table of contents
Full compatibility | |
With restrictions | |
In release check | |
No compatibility |
Inverters
Fronius
EnergyManager pro | Manager flex | |
---|---|---|
Primo (3.0 - 8.2) |
|
|
Symo (3.0 - 20.0) |
|
|
Symo Advanced |
|
|
ECO |
|
|
Primo / Symo GEN 24 |
|
|
Primo / Symo GEN 24 plus [hybrid system] |
|
|
SMA
EnergyManager pro | Manager flex | |
---|---|---|
Sunny Boy (1.5 -6.0) |
|
|
Sunny Tripower (3.0 - 10.0) |
|
|
Sunny Tripower (15000 - 25000) TL |
|
|
Sunny Tripower (5.0-10.0) -3SE-40 [Hybrid system] |
|
|
Sunny Tripower X (12 - 25) |
|
|
Sunny Tripower CORE1 |
|
|
Sunny Tripower CORE2 |
|
|
Sunny Tripower X (12 - 25) | Curtailment (limiting the feed-in-power) via the SOLARWATT Manager is currently not possible. |
Sunny Tripower CORE1 /2 | Support for this device is currently undergoing our certification & approvals process. Until we've completed our checks, we can't guarantee that this device will work perfectly with the Manager. |
KACO
energyManager pro | Manager flex | |
---|---|---|
blueplanet NX3 M2 (3.0 - 20.0) |
|
|
blueplanet NX3 M3 (25.0 - 33.0) |
|
|
Kostal
EnergyManager pro | Manager flex | |
---|---|---|
PLENTICORE plus (3.0 - 10) |
|
|
PIKO IQ (3.0 - 10) |
|
|
PIKO MP plus |
|
|
PIKO CI |
|
|
PIKO (12 - 20) |
|
|
Steca / Kontron Solar
EnergyManager pro | Manager flex | |
---|---|---|
StecaGrid coolcept fleX XL (4213 - 10013) |
|
|
StecaGrid coolcept fleX (1511 - 3611) |
|
|
StecaGrid coolcept3 fleX (3213 - 6013) |
|
|
StecaGrid coolcept fleX (3011 - 5011)_2 |
|
|
SolBrid |
|
|
Huawei
EnergyManager pro | Manager flex | |
---|---|---|
SUN2000 -2/3/3.68/4/4.6/5/6KTL-L1* |
|
|
SUN2000 -3/4/5/6/8/10KTL-M1 (high-current version)* |
|
|
*) Hybrid system with LUNA2000-5/10/15-S0 battery system possible. Additional component required for integration into the energy management system: Smart Dongle WiFi-FE
SUN2000 -2/3/3.68/4/4.6/5/6KTL-L1 | Unknown error; the device cannot be installed with the current Manager flex firmware. We are currently investigating this problem. |
SolarEdge
EnergyManager pro | Manager flex | |
---|---|---|
SolarEdge |
|
|
Restrictions
SolarEdge | Permanent error message in the Installer Center: "NoPowerACOutMax" (cannot be acknowledged) |
SolarEdge | Connection problems may occur when using inverter firmware versions 004.019 and 004.020. We are currently investigating this problem. The use of an external meter to record the inverter power is recommended. See Incompatible inverters |
Incompatible inverters
For inverters not directly supported by the Manager, the power must be recorded via separate power meters or energy meters. Depending on Manager hardware used, different types of meters can be used for performance recording.
There are also differences in the number of meters that can be configured as generation meters.
Meter type | Number of meters that can be configured as generation meters | |
---|---|---|
EnergyManager pro | Manager flex | |
S0 meter* | 2 | 1 |
Shelly Pro 3EM | unlimited | unlimited |
Shelly 3 EM | cannot be used as a generation meter | unlimited |
Installation instructions can be found under Incompatible inverters.
Home battery systems
SOLARWATT
EnergyManager pro | Manager flex | |
---|---|---|
Battery flex AC-1 |
|
|
Battery flex backup solo |
|
|
Battery flex DC |
|
|
MyReserve Command 25 |
|
|
MyReserve Command 20.2 |
|
|
MyReserve 500/800 |
|
|
VARTA
EnergyManager pro | Manager flex | |
---|---|---|
pulse neo | * | ** |
element S5 backup | * | ** |
Cascade element S5 | * | ** |
Cascade pulse neo | * | ** |
*) Varta Split Core Sensor cannot be used as main meter. The installation of an additional bi-directional meter is required.
**) Varta Split Core Sensor can be used as main meter.
Hybrid systems
A list of supported hybrid systems can be found under Inverters.
EV Chargers
Keba
EnergyManager pro | Manager flex | |
---|---|---|
KeContact P30 c-series |
|
|
KeContact P30 x-series |
|
|
KeContact P30 Company car charger |
|
|
KeContact P30 PV Edition |
|
|
KeContact P30 a-Series |
|
|
KeContact P30 German market edition |
|
|
Webasto
EnergyManager pro | Manager flex | |
---|---|---|
live | LAN (number of devices*: 1) | LAN (Number of devices*: 1) |
next | -- | LAN, WiFi (via router) (number of devices*: 1) |
Alfen
EnergyManager pro | Manager flex | |
---|---|---|
Eve Single (S-line / Pro Line) |
|
|
Restrictions
The automatic phase switching function is not available when installed on an EnergyManager pro.
Possible number of actively controlled EV chargers in the energy management system
EnergyManager pro | SOLARWATT Manager flex | |
---|---|---|
Keba | 1 | 3 |
Webasto (Live/Next) | 1 | 1 |
Alfen | 1 | 3 |
Shelly devices
Possible applications
The different types of Shelly device can perform a wide range of tasks in the SOLARWATT energy management system:
Network | Possible applications | ||
---|---|---|---|
EnergyManager pro | Manager flex | ||
3EM | WIFI |
|
|
Pro 3EM | WIFI LAN |
|
|
Pro 3EM 400 | WIFI LAN |
|
|
EM | WIFI |
|
|
Per 1PM Pro 2PM Pro 4PM | WIFI LAN |
|
|
Plus1PM Plus2PM | WIFI |
|
|
Plus Plug S Plug S | WIFI |
|
|
Shelly 2.5 | WIFI |
|
|
Main meter: Use as bi-directional meter
Energy meter: Use as uni-directional meter
Network interface and installation location
shelly device | network interface | installation location |
---|---|---|
3EM | WIFI | Switch cabinet |
Pro 3EM | WIFI LAN | Switch cabinet |
Pro 1PM Pro 2PM Pro 4PM | WIFI LAN | Switch cabinet |
Plus 1PM Plus 2PM | WIFI | Flush-mounted socket |
Plus Plug S Plug S | WIFI | Schuko socket outlet |
Shelly 2.5 | WIFI | Flush-mounted socket |
Heating solutions
EnergyManager pro | Manager flex | |
---|---|---|
Heat pump via SG Ready interface | * | * |
Stiebel Eltron heat pump Supported types:
| ||
EGO Smart Heater | ||
my-PV AC ELWA 2 | ||
my-PV AC THOR 9s |
*) Connection via Shelly 3EM.
Energy meters / main meters
Manager flex
Meter types that can be used with the SOLARWATT Manager flex:
Interface | Possible applications | |
---|---|---|
S0 meter* | S0 |
|
SOLARWATT AC-Sensor |
Ethernet via |
|
Shelly devices** | Ethernet / WiFi |
|
*) A total of up to 2 S0 meters can be connected. For more information, see the S0 counter section at the bottom of this page.
**) See section Shelly devices.
EnergyManager pro
Meter types that can be used with the SOLARWATT EnergyManager pro:
Interface | Possible applications | |
---|---|---|
S0 meter* | S0 |
|
SOLARWATT AC-Sensor |
|
|
Shelly devices** | Ethernet / WiFi |
|
Janitza UMG 103-CBM | RS485 |
|
ABB B23 | RS485 |
|
*) A total of up to 2 S0 meters can be connected (without digital extension). For more information, see section S0 meters at the bottom of this page.
***) See section Shelly devices.
S0 meters
S0 meters are electrical energy meters that transmit their meter readings via electrical pulses.
Meters that deliver pulses in accordance with EN62053-31 can be connected to the Manager by connecting them directly to the S0 inputs of the SOLARWATT Manager unit.
Possible applications
Possible applications | ||
---|---|---|
EnergyManager pro | Manager flex | |
uni-directional S0 meter |
|
|
bi-directional S0-meter |
|
|
*) Can only be used in conjunction with a Digital Extension.
Number of connectable meters
Quantity | |||
---|---|---|---|
EnergyManager pro without Digital Extension | EnergyManager pro with Digital Extension | Manager flex | |
S0 meter as energy meter | 2 | 8 | 2 |
S0 meter as generation meter (inverter replacement) | 2 | 8 | 1 |
Tested meter types
The following meter types have been tested for full compatibility with the SOLARWATT Managers. Other makes have not been tested, but may still work without issue. The list only shows the devices tested by SOLARWATT.
- SOLARWATT EnergyMeter (3-phase)
- SOLARWATT Manager meter 1-phase
- B+G DRS155D (1-phase)
- KDK PRO380-S (3-phase, 2-direction meter)
- Eltako DSZ15D (Not compatible with Digital Extension)
- Eltako DSZ15DE (Not compatible with Digital Extension)
The Eastron SDM630 MCT is not compatible with the EnergyManager pro or SOLARWATT Manager flex.